Back
From: Chris Williams (BINGOS)
Subject: FAIL Flame-Palette-0.02 v5.12.2 FreeBSD
Date: 2011-09-08T21:20:39Z
This distribution has been tested as part of the CPAN Testers
project, supporting the Perl programming language. See
http://wiki.cpantesters.org/ for more information or email
questions to cpan-testers-discuss@perl.org
--
Dear TWESTWIND,
This is a computer-generated error report created automatically by
CPANPLUS, version 0.9109. Testers personal comments may appear
at the end of this report.
Thank you for uploading your work to CPAN. However, it appears that
there were some problems testing your distribution.
TEST RESULTS:
Below is the error stack from stage 'make test':
[MSG] [Thu Sep 8 22:19:25 2011] cp lib/Flame/Palette.pm blib/lib/Flame/Palette.pm
Manifying blib/man3/Flame::Palette.3
[ERROR] [Thu Sep 8 22:19:25 2011] MAKE TEST failed: PERL_DL_NONLAZY=1 /usr/home/cpan/pit/bare/perl-5.12.2/bin/perl "-MExtUtils::Command::MM" "-e" "test_harness(0, 'blib/lib', 'blib/arch')" t/*.t
# Failed test 'use Flame::Palette;'
# at t/Flame-Palette.t line 14.
# Tried to use 'Flame::Palette'.
# Error: Can't locate Math/Interpolator/Linear.pm in @INC (@INC contains: /usr/home/cpan/pit/bare/conf/perl-5.12.2/.cpanplus/5.12.2/build/Flame-Palette-0.02/blib/lib /usr/home/cpan/pit/bare/conf/perl-5.12.2/.cpanplus/5.12.2/build/Flame-Palette-0.02/blib/arch /usr/home/cpan/pit/bare/conf/perl-5.12.2/.cpanplus/5.12.2/build/Flame-Palette-0.02/blib/lib /usr/home/cpan/pit/bare/conf/perl-5.12.2/.cpanplus/5.12.2/build/Flame-Palette-0.02/blib/arch /usr/home/cpan/pit/bare/perl-5.12.2/lib/site_perl/5.12.2/amd64-freebsd /usr/home/cpan/pit/bare/perl-5.12.2/lib/site_perl/5.12.2 /usr/home/cpan/pit/bare/perl-5.12.2/lib/5.12.2/amd64-freebsd /usr/home/cpan/pit/bare/perl-5.12.2/lib/5.12.2 .) at /usr/home/cpan/pit/bare/conf/perl-5.12.2/.cpanplus/5.12.2/build/Flame-Palette-0.02/blib/lib/Flame/Palette.pm line 8.
# BEGIN failed--compilation aborted at /usr/home/cpan/pit/bare/conf/perl-5.12.2/.cpanplus/5.12.2/build/Flame-Palette-0.02/blib/lib/Flame/Palette.pm line 8.
# Compilation failed in require at (eval 4) line 2.
# BEGIN failed--compilation aborted at (eval 4) line 2.
Can't locate XML/Writer.pm in @INC (@INC contains: /usr/home/cpan/pit/bare/conf/perl-5.12.2/.cpanplus/5.12.2/build/Flame-Palette-0.02/blib/lib /usr/home/cpan/pit/bare/conf/perl-5.12.2/.cpanplus/5.12.2/build/Flame-Palette-0.02/blib/arch /usr/home/cpan/pit/bare/conf/perl-5.12.2/.cpanplus/5.12.2/build/Flame-Palette-0.02/blib/lib /usr/home/cpan/pit/bare/conf/perl-5.12.2/.cpanplus/5.12.2/build/Flame-Palette-0.02/blib/arch /usr/home/cpan/pit/bare/perl-5.12.2/lib/site_perl/5.12.2/amd64-freebsd /usr/home/cpan/pit/bare/perl-5.12.2/lib/site_perl/5.12.2 /usr/home/cpan/pit/bare/perl-5.12.2/lib/5.12.2/amd64-freebsd /usr/home/cpan/pit/bare/perl-5.12.2/lib/5.12.2 .) at t/Flame-Palette.t line 16.
BEGIN failed--compilation aborted at t/Flame-Palette.t line 16.
# Looks like you planned 2308 tests but ran 1.
# Looks like you failed 1 test of 1 run.
# Looks like your test exited with 2 just after 1.
t/Flame-Palette.t ..
Dubious, test returned 2 (wstat 512, 0x200)
Failed 2308/2308 subtests
Test Summary Report
-------------------
t/Flame-Palette.t (Wstat: 512 Tests: 1 Failed: 1)
Failed test: 1
Non-zero exit status: 2
Parse errors: Bad plan. You planned 2308 tests but ran 1.
Files=1, Tests=1, 0 wallclock secs ( 0.00 usr 0.03 sys + 0.03 cusr 0.00 csys = 0.06 CPU)
Result: FAIL
Failed 1/1 test programs. 1/1 subtests failed.
*** Error code 2
Stop in /usr/home/cpan/pit/bare/conf/perl-5.12.2/.cpanplus/5.12.2/build/Flame-Palette-0.02.
[MSG] [Thu Sep 8 22:19:25 2011] DEFAULT 'proceed_on_test_failure' HANDLER RETURNING 'sub return value'
MISSING PREREQUISITES:
It was observed that the test suite seem to fail without these modules:
Math::Interpolator::Linear
XML::Writer
As such, adding the prerequisite module(s) to 'PREREQ_PM' in your
Makefile.PL should solve this problem. For example:
WriteMakefile(
AUTHOR => 'TWESTWIND (cpanplus-info@lists.sf.net)',
... # other information
PREREQ_PM => {
'Math::Interpolator::Linear' => '0', # or a minimum working version
'XML::Writer' => '0', # or a minimum working version
}
);
Thanks! :-)
PREREQUISITES:
Here is a list of prerequisites you specified and versions we
managed to load:
Module Name Have Want
ExtUtils::MakeMaker 6.58 0
Perl module toolchain versions installed:
Module Name Have
CPANPLUS 0.9109
CPANPLUS::Dist::Build 0.56
Cwd 3.33
ExtUtils::CBuilder 0.280202
ExtUtils::Command 1.16
ExtUtils::Install 1.55
ExtUtils::MakeMaker 6.58
ExtUtils::Manifest 1.58
ExtUtils::ParseXS 2.2206
File::Spec 3.33
Module::Build 0.3800
Test::Harness 3.23
Test::More 0.98
version 0.91
******************************** NOTE ********************************
The comments above are created mechanically, possibly without manual
checking by the sender. As there are many people performing automatic
tests on each upload to CPAN, it is likely that you will receive
identical messages about the same problem.
If you believe that the message is mistaken, please reply to the first
one with correction and/or additional informations, and do not take
it personally. We appreciate your patience. :)
**********************************************************************
Additional comments:
This report was machine-generated by CPANPLUS::Dist::YACSmoke 0.64.
Powered by minismokebox version 0.54
------------------------------
ENVIRONMENT AND OTHER CONTEXT
------------------------------
Environment variables:
AUTOMATED_TESTING = 1
PATH = /sbin:/bin:/usr/sbin:/usr/bin:/usr/games:/usr/local/sbin:/usr/local/bin:/home/cpan/bin
PERL5LIB = :/usr/home/cpan/pit/bare/conf/perl-5.12.2/.cpanplus/5.12.2/build/Flame-Palette-0.02/blib/lib:/usr/home/cpan/pit/bare/conf/perl-5.12.2/.cpanplus/5.12.2/build/Flame-Palette-0.02/blib/arch
PERL5_CPANPLUS_IS_RUNNING = 68807
PERL5_CPANPLUS_IS_VERSION = 0.9109
PERL5_MINISMOKEBOX = 0.54
PERL5_YACSMOKE_BASE = /usr/home/cpan/pit/bare/conf/perl-5.12.2
PERL_EXTUTILS_AUTOINSTALL = --defaultdeps
PERL_MM_USE_DEFAULT = 1
SHELL = /usr/local/bin/bash
TERM = screen
Perl special variables (and OS-specific diagnostics, for MSWin32):
Perl: $^X = /usr/home/cpan/pit/bare/perl-5.12.2/bin/perl
UID: $< = 1002
EUID: $> = 1002
GID: $( = 1002 1002
EGID: $) = 1002 1002
-------------------------------
--
Summary of my perl5 (revision 5 version 12 subversion 2) configuration:
Platform:
osname=freebsd, osvers=9.0-current-201101, archname=amd64-freebsd
uname='freebsd flooble.bingosnet.co.uk 9.0-current-201101 freebsd 9.0-current-201101 #0: mon jan 3 22:15:39 utc 2011 root@farrell.cse.buffalo.edu:usrobjusrsrcsysgeneric amd64 '
config_args='-des -Dprefix=/usr/home/cpan/pit/bare/perl-5.12.2'
hint=recommended, useposix=true, d_sigaction=define
useithreads=undef, usemultiplicity=undef
useperlio=define, d_sfio=undef, uselargefiles=define, usesocks=undef
use64bitint=define, use64bitall=define, uselongdouble=undef
usemymalloc=n, bincompat5005=undef
Compiler:
cc='cc', ccflags ='-DHAS_FPSETMASK -DHAS_FLOATINGPOINT_H -fno-strict-aliasing -pipe -fstack-protector -I/usr/local/include',
optimize='-O',
cppflags='-DHAS_FPSETMASK -DHAS_FLOATINGPOINT_H -fno-strict-aliasing -pipe -fstack-protector -I/usr/local/include'
ccversion='', gccversion='4.2.1 20070719 [FreeBSD]', gccosandvers=''
intsize=4, longsize=8, ptrsize=8, doublesize=8, byteorder=12345678
d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=16
ivtype='long', ivsize=8, nvtype='double', nvsize=8, Off_t='off_t', lseeksize=8
alignbytes=8, prototype=define
Linker and Libraries:
ld='cc', ldflags ='-Wl,-E -fstack-protector -L/usr/local/lib'
libpth=/usr/lib /usr/local/lib
libs=-lgdbm -lm -lcrypt -lutil -lc
perllibs=-lm -lcrypt -lutil -lc
libc=, so=so, useshrplib=false, libperl=libperl.a
gnulibc_version=''
Dynamic Linking:
dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags=' '
cccdlflags='-DPIC -fPIC', lddlflags='-shared -L/usr/local/lib -fstack-protector'
Characteristics of this binary (from libperl):
Compile-time options: PERL_DONT_CREATE_GVSV PERL_MALLOC_WRAP USE_64_BIT_ALL
USE_64_BIT_INT USE_LARGE_FILES USE_PERLIO
USE_PERL_ATOF
Built under freebsd
Compiled at Apr 29 2011 02:19:53
%ENV:
PERL5LIB=":/usr/home/cpan/pit/bare/conf/perl-5.12.2/.cpanplus/5.12.2/build/Flame-Palette-0.02/blib/lib:/usr/home/cpan/pit/bare/conf/perl-5.12.2/.cpanplus/5.12.2/build/Flame-Palette-0.02/blib/arch"
PERL5_CPANPLUS_IS_RUNNING="68807"
PERL5_CPANPLUS_IS_VERSION="0.9109"
PERL5_MINISMOKEBOX="0.54"
PERL5_YACSMOKE_BASE="/usr/home/cpan/pit/bare/conf/perl-5.12.2"
PERL_EXTUTILS_AUTOINSTALL="--defaultdeps"
PERL_MM_USE_DEFAULT="1"
@INC:
/usr/home/cpan/pit/bare/conf/perl-5.12.2/.cpanplus/5.12.2/build/Flame-Palette-0.02/blib/lib
/usr/home/cpan/pit/bare/conf/perl-5.12.2/.cpanplus/5.12.2/build/Flame-Palette-0.02/blib/arch
/usr/home/cpan/pit/bare/perl-5.12.2/lib/site_perl/5.12.2/amd64-freebsd
/usr/home/cpan/pit/bare/perl-5.12.2/lib/site_perl/5.12.2
/usr/home/cpan/pit/bare/perl-5.12.2/lib/5.12.2/amd64-freebsd
/usr/home/cpan/pit/bare/perl-5.12.2/lib/5.12.2
.