Back
From: Chris Williams (BINGOS)
Subject: PASS Data-Overlay-0.54 v5.12.1 GNU/Linux
Date: 2012-03-23T02:56:24Z
This distribution has been tested as part of the CPAN Testers
project, supporting the Perl programming language. See
http://wiki.cpantesters.org/ for more information or email
questions to cpan-testers-discuss@perl.org
--
Dear BOWMANBS,
This is a computer-generated error report created automatically by
CPANPLUS, version 0.9121. Testers personal comments may appear
at the end of this report.
Thank you for uploading your work to CPAN. Congratulations!
All tests were successful.
TEST RESULTS:
Below is the error stack from stage 'make test':
PERL_DL_NONLAZY=1 /home/cpan/pit/thr-ld/perl-5.12.1/bin/perl "-MExtUtils::Command::MM" "-e" "test_harness(0, 'blib/lib', 'blib/arch')" t/*.t
# Testing Data::Overlay 0.54
t/00.load.t ............... ok
t/actions.t ............... ok
t/author-critic.t ......... skipped: these tests are for testing by the author
t/author-synopsis.t ....... skipped: these tests are for testing by the author
t/basic.t ................. ok
t/blessed.t ............... ok
t/escaped.t ............... ok
t/release-pod-coverage.t .. skipped: these tests are for release candidate testing
t/release-pod-syntax.t .... skipped: these tests are for release candidate testing
All tests successful.
Files=9, Tests=147, 1 wallclock secs ( 0.05 usr 0.01 sys + 0.38 cusr 0.07 csys = 0.51 CPU)
Result: PASS
PREREQUISITES:
Here is a list of prerequisites you specified and versions we
managed to load:
Module Name Have Want
List::MoreUtils 0.33 0
Sub::Name 0.05 0
Test::Deep 0.109 0
Test::More 0.98 0.87_01
Perl module toolchain versions installed:
Module Name Have
CPANPLUS 0.9121
CPANPLUS::Dist::Build 0.62
Cwd 3.33
ExtUtils::CBuilder 0.280205
ExtUtils::Command 1.16
ExtUtils::Install 1.55
ExtUtils::MakeMaker 6.62
ExtUtils::Manifest 1.60
ExtUtils::ParseXS 3.15
File::Spec 3.33
Module::Build 0.40
Test::Harness 3.23
Test::More 0.98
version 0.96
******************************** NOTE ********************************
The comments above are created mechanically, possibly without manual
checking by the sender. As there are many people performing automatic
tests on each upload to CPAN, it is likely that you will receive
identical messages about the same problem.
If you believe that the message is mistaken, please reply to the first
one with correction and/or additional informations, and do not take
it personally. We appreciate your patience. :)
**********************************************************************
Additional comments:
This report was machine-generated by CPANPLUS::Dist::YACSmoke 0.70.
Powered by minismokebox version 0.54
------------------------------
ENVIRONMENT AND OTHER CONTEXT
------------------------------
Environment variables:
AUTOMATED_TESTING = 1
LANG = en_US
LC_COLLATE = C
PATH = /usr/local/bin:/usr/bin:/bin:/usr/games:/usr/lib64/java/bin:/usr/lib64/qt/bin:/usr/share/texmf/bin:.
PERL5LIB = :/home/cpan/pit/thr-ld/conf/perl-5.12.1/.cpanplus/5.12.1/build/List-MoreUtils-0.33/blib/lib:/home/cpan/pit/thr-ld/conf/perl-5.12.1/.cpanplus/5.12.1/build/List-MoreUtils-0.33/blib/arch:/home/cpan/pit/thr-ld/conf/perl-5.12.1/.cpanplus/5.12.1/build/Sub-Name-0.05/blib/lib:/home/cpan/pit/thr-ld/conf/perl-5.12.1/.cpanplus/5.12.1/build/Sub-Name-0.05/blib/arch:/home/cpan/pit/thr-ld/conf/perl-5.12.1/.cpanplus/5.12.1/build/Test-Tester-0.108/blib/lib:/home/cpan/pit/thr-ld/conf/perl-5.12.1/.cpanplus/5.12.1/build/Test-Tester-0.108/blib/arch:/home/cpan/pit/thr-ld/conf/perl-5.12.1/.cpanplus/5.12.1/build/Test-NoWarnings-1.04/blib/lib:/home/cpan/pit/thr-ld/conf/perl-5.12.1/.cpanplus/5.12.1/build/Test-NoWarnings-1.04/blib/arch:/home/cpan/pit/thr-ld/conf/perl-5.12.1/.cpanplus/5.12.1/build/Test-Deep-0.109/blib/lib:/home/cpan/pit/thr-ld/conf/perl-5.12.1/.cpanplus/5.12.1/build/Test-Deep-0.109/blib/arch:/home/cpan/pit/thr-ld/conf/perl-5.12.1/.cpanplus/5.12.1/build/Data-Overlay-0.54/blib/lib:/home/cpan/pit/thr-ld/conf/perl-5.12.1/.cpanplus/5.12.1/build/Data-Overlay-0.54/blib/arch
PERL5_CPANPLUS_IS_RUNNING = 8597
PERL5_CPANPLUS_IS_VERSION = 0.9121
PERL5_MINISMOKEBOX = 0.54
PERL5_YACSMOKE_BASE = /home/cpan/pit/thr-ld/conf/perl-5.12.1
PERL_EXTUTILS_AUTOINSTALL = --defaultdeps
PERL_MM_USE_DEFAULT = 1
SHELL = /bin/bash
TERM = screen
Perl special variables (and OS-specific diagnostics, for MSWin32):
Perl: $^X = /home/cpan/pit/thr-ld/perl-5.12.1/bin/perl
UID: $< = 1001
EUID: $> = 1001
GID: $( = 100 100
EGID: $) = 100 100
-------------------------------
--
Summary of my perl5 (revision 5 version 12 subversion 1) configuration:
Platform:
osname=linux, osvers=2.6.33.4, archname=x86_64-linux-thread-multi-ld
uname='linux slack64 2.6.33.4 #3 smp wed may 12 23:13:09 cdt 2010 x86_64 intel(r) xeon(r) cpu e5520 @ 2.27ghz genuineintel gnulinux '
config_args='-des -Dprefix=/home/cpan/pit/thr-ld/perl-5.12.1 -Dusethreads -Duselongdouble'
hint=recommended, useposix=true, d_sigaction=define
useithreads=define, usemultiplicity=define
useperlio=define, d_sfio=undef, uselargefiles=define, usesocks=undef
use64bitint=define, use64bitall=define, uselongdouble=define
usemymalloc=n, bincompat5005=undef
Compiler:
cc='cc', ccflags ='-D_REENTRANT -D_GNU_SOURCE -fno-strict-aliasing -pipe -fstack-protector -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64',
optimize='-O2',
cppflags='-D_REENTRANT -D_GNU_SOURCE -fno-strict-aliasing -pipe -fstack-protector -I/usr/local/include'
ccversion='', gccversion='4.4.4', gccosandvers=''
intsize=4, longsize=8, ptrsize=8, doublesize=8, byteorder=12345678
d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=16
ivtype='long', ivsize=8, nvtype='long double', nvsize=16, Off_t='off_t', lseeksize=8
alignbytes=16, prototype=define
Linker and Libraries:
ld='cc', ldflags =' -fstack-protector -L/usr/local/lib'
libpth=/usr/local/lib /lib/../lib64 /usr/lib/../lib64 /lib /usr/lib /lib64 /usr/lib64 /usr/local/lib64
libs=-lnsl -lgdbm -ldb -ldl -lm -lcrypt -lutil -lpthread -lc
perllibs=-lnsl -ldl -lm -lcrypt -lutil -lpthread -lc
libc=, so=so, useshrplib=false, libperl=libperl.a
gnulibc_version='2.11.1'
Dynamic Linking:
dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags='-Wl,-E'
cccdlflags='-fPIC', lddlflags='-shared -O2 -L/usr/local/lib -fstack-protector'
Characteristics of this binary (from libperl):
Compile-time options: MULTIPLICITY PERL_DONT_CREATE_GVSV
PERL_IMPLICIT_CONTEXT PERL_MALLOC_WRAP USE_64_BIT_ALL
USE_64_BIT_INT USE_ITHREADS USE_LARGE_FILES
USE_LONG_DOUBLE USE_PERLIO USE_PERL_ATOF
USE_REENTRANT_API
Built under linux
Compiled at Jan 5 2012 23:59:10
%ENV:
PERL5LIB=":/home/cpan/pit/thr-ld/conf/perl-5.12.1/.cpanplus/5.12.1/build/List-MoreUtils-0.33/blib/lib:/home/cpan/pit/thr-ld/conf/perl-5.12.1/.cpanplus/5.12.1/build/List-MoreUtils-0.33/blib/arch:/home/cpan/pit/thr-ld/conf/perl-5.12.1/.cpanplus/5.12.1/build/Sub-Name-0.05/blib/lib:/home/cpan/pit/thr-ld/conf/perl-5.12.1/.cpanplus/5.12.1/build/Sub-Name-0.05/blib/arch:/home/cpan/pit/thr-ld/conf/perl-5.12.1/.cpanplus/5.12.1/build/Test-Tester-0.108/blib/lib:/home/cpan/pit/thr-ld/conf/perl-5.12.1/.cpanplus/5.12.1/build/Test-Tester-0.108/blib/arch:/home/cpan/pit/thr-ld/conf/perl-5.12.1/.cpanplus/5.12.1/build/Test-NoWarnings-1.04/blib/lib:/home/cpan/pit/thr-ld/conf/perl-5.12.1/.cpanplus/5.12.1/build/Test-NoWarnings-1.04/blib/arch:/home/cpan/pit/thr-ld/conf/perl-5.12.1/.cpanplus/5.12.1/build/Test-Deep-0.109/blib/lib:/home/cpan/pit/thr-ld/conf/perl-5.12.1/.cpanplus/5.12.1/build/Test-Deep-0.109/blib/arch:/home/cpan/pit/thr-ld/conf/perl-5.12.1/.cpanplus/5.12.1/build/Data-Overlay-0.54/blib/lib:/home/cpan/pit/thr-ld/conf/perl-5.12.1/.cpanplus/5.12.1/build/Data-Overlay-0.54/blib/arch"
PERL5_CPANPLUS_IS_RUNNING="8597"
PERL5_CPANPLUS_IS_VERSION="0.9121"
PERL5_MINISMOKEBOX="0.54"
PERL5_YACSMOKE_BASE="/home/cpan/pit/thr-ld/conf/perl-5.12.1"
PERL_EXTUTILS_AUTOINSTALL="--defaultdeps"
PERL_MM_USE_DEFAULT="1"
@INC:
/home/cpan/pit/thr-ld/conf/perl-5.12.1/.cpanplus/5.12.1/build/List-MoreUtils-0.33/blib/lib
/home/cpan/pit/thr-ld/conf/perl-5.12.1/.cpanplus/5.12.1/build/List-MoreUtils-0.33/blib/arch
/home/cpan/pit/thr-ld/conf/perl-5.12.1/.cpanplus/5.12.1/build/Sub-Name-0.05/blib/lib
/home/cpan/pit/thr-ld/conf/perl-5.12.1/.cpanplus/5.12.1/build/Sub-Name-0.05/blib/arch
/home/cpan/pit/thr-ld/conf/perl-5.12.1/.cpanplus/5.12.1/build/Test-Tester-0.108/blib/lib
/home/cpan/pit/thr-ld/conf/perl-5.12.1/.cpanplus/5.12.1/build/Test-Tester-0.108/blib/arch
/home/cpan/pit/thr-ld/conf/perl-5.12.1/.cpanplus/5.12.1/build/Test-NoWarnings-1.04/blib/lib
/home/cpan/pit/thr-ld/conf/perl-5.12.1/.cpanplus/5.12.1/build/Test-NoWarnings-1.04/blib/arch
/home/cpan/pit/thr-ld/conf/perl-5.12.1/.cpanplus/5.12.1/build/Test-Deep-0.109/blib/lib
/home/cpan/pit/thr-ld/conf/perl-5.12.1/.cpanplus/5.12.1/build/Test-Deep-0.109/blib/arch
/home/cpan/pit/thr-ld/conf/perl-5.12.1/.cpanplus/5.12.1/build/Data-Overlay-0.54/blib/lib
/home/cpan/pit/thr-ld/conf/perl-5.12.1/.cpanplus/5.12.1/build/Data-Overlay-0.54/blib/arch
/home/cpan/pit/thr-ld/perl-5.12.1/lib/site_perl/5.12.1/x86_64-linux-thread-multi-ld
/home/cpan/pit/thr-ld/perl-5.12.1/lib/site_perl/5.12.1
/home/cpan/pit/thr-ld/perl-5.12.1/lib/5.12.1/x86_64-linux-thread-multi-ld
/home/cpan/pit/thr-ld/perl-5.12.1/lib/5.12.1
.