Report for DBIx-Tree-NestedSet-0.16

Back
From: Steven Schubiger (SCHUBIGER)
Subject: FAIL DBIx-Tree-NestedSet-0.16 v5.12.3 MirOS BSD
Date: 2011-05-14T20:51:41Z

This distribution has been tested as part of the CPAN Testers
project, supporting the Perl programming language.  See
http://wiki.cpantesters.org/ for more information or email
questions to cpan-testers-discuss@perl.org


--
Dear Dan Collis Puro,

This is a computer-generated report for DBIx-Tree-NestedSet-0.16
on perl 5.12.3, created by CPAN-Reporter-1.1902.

Thank you for uploading your work to CPAN.  However, there was a problem
testing your distribution.

If you think this report is invalid, please consult the CPAN Testers Wiki
for suggestions on how to avoid getting FAIL reports for missing library
or binary dependencies, unsupported operating systems, and so on:

http://wiki.cpantesters.org/wiki/CPANAuthorNotes

Sections of this report:

    * Tester comments
    * Program output
    * Prerequisites
    * Environment and other context

------------------------------
TESTER COMMENTS
------------------------------

Additional comments from tester:

this report is from an automated smoke testing program
and was not reviewed by a human for accuracy

------------------------------
PROGRAM OUTPUT
------------------------------

Output from '/usr/bin/make test':

PERL_DL_NONLAZY=1 /home/sts/cpansmoke/perl-5.12.3/bin/perl "-Iblib/lib" "-Iblib/arch" test.pl
1..12
ok 1
install_driver(mysql) failed: Can't locate DBD/mysql.pm in @INC (@INC contains: blib/lib blib/arch /home/sts/cpansmoke/perl-5.12.3/cpan/build/DBI-1.616-ydK4Lp/blib/arch /home/sts/cpansmoke/perl-5.12.3/cpan/build/DBI-1.616-ydK4Lp/blib/lib /home/sts/cpansmoke/perl-5.12.3/lib/site_perl/5.12.3/MirBSD.i386-mirbsd-thread-multi /home/sts/cpansmoke/perl-5.12.3/lib/site_perl/5.12.3 /home/sts/cpansmoke/perl-5.12.3/lib/5.12.3/MirBSD.i386-mirbsd-thread-multi /home/sts/cpansmoke/perl-5.12.3/lib/5.12.3 .) at (eval 3) line 3.
Perhaps the DBD::mysql perl module hasn't been fully installed,
or perhaps the capitalisation of 'mysql' isn't right.
Available drivers: DBM, ExampleP, File, Gofer, Proxy, Sponge.
 at test.pl line 39
*** Error code 2

Stop in /home/sts/cpansmoke/perl-5.12.3/cpan/build/DBIx-Tree-NestedSet-0.16-gYLSQf (line 790 of Makefile).

------------------------------
PREREQUISITES
------------------------------

Prerequisite modules loaded:

requires:

    Module Need Have 
    ------ ---- -----
    DBI    1.15 1.616


------------------------------
ENVIRONMENT AND OTHER CONTEXT
------------------------------

Environment variables:

    AUTOMATED_TESTING = 1
    LC_CTYPE = en_US.UTF-8
    PATH = /home/sts/.etc/bin:/usr/local/bin:/usr/mpkg/bin:/usr/bin:/bin:/usr/X11R6/bin:/usr/sbin:/sbin:/usr/mpkg/sbin:/usr/games
    PERL5LIB = /home/sts/cpansmoke/perl-5.12.3/cpan/build/DBI-1.616-ydK4Lp/blib/arch:/home/sts/cpansmoke/perl-5.12.3/cpan/build/DBI-1.616-ydK4Lp/blib/lib
    PERL5OPT = 
    PERL5_CPANPLUS_IS_RUNNING = 14167
    PERL5_CPAN_IS_RUNNING = 14167
    PERL5_CPAN_IS_RUNNING_IN_RECURSION = 29,14167
    PERL_CR_SMOKER_CURRENT = DBIx-Tree-NestedSet-0.16
    PERL_EXTUTILS_AUTOINSTALL = --defaultdeps
    PERL_MM_USE_DEFAULT = 1
    SHELL = /bin/mksh
    TERM = screen
    TMPDIR = /home/sts/cpansmoke/tmp

Perl special variables (and OS-specific diagnostics, for MSWin32):

    $^X = /home/sts/cpansmoke/perl-5.12.3/bin/perl
    $UID/$EUID = 3000 / 3000
    $GID = 3000 3000 0 9 20
    $EGID = 3000 3000 0 9 20

Perl module toolchain versions installed:

    Module              Have   
    ------------------- -------
    CPAN                1.9600 
    Cwd                 3.31   
    ExtUtils::CBuilder  0.27   
    ExtUtils::Command   1.16   
    ExtUtils::Install   1.55   
    ExtUtils::MakeMaker 6.56   
    ExtUtils::Manifest  1.57   
    ExtUtils::ParseXS   2.21   
    File::Spec          3.31_01
    Module::Build       0.3603 
    Module::Signature   n/a    
    Test::Harness       3.17   
    Test::More          0.94   
    YAML                0.72   
    YAML::Syck          n/a    
    version             0.82   


--

Summary of my perl5 (revision 5 version 12 subversion 3) configuration:
   
  Platform:
    osname=mirbsd, osvers=10, archname=MirBSD.i386-mirbsd-thread-multi
    uname='mirbsd cpansmoke4 10 kv#10uae-20110123 generic#1308 i386 '
    config_args='-des -Dusethreads -Dprefix=/home/sts/cpansmoke/perl-5.12.3'
    hint=recommended, useposix=true, d_sigaction=define
    useithreads=define, usemultiplicity=define
    useperlio=define, d_sfio=undef, uselargefiles=define, usesocks=undef
    use64bitint=undef, use64bitall=undef, uselongdouble=undef
    usemymalloc=n, bincompat5005=undef
  Compiler:
    cc='mgcc', ccflags ='-pthread -fhonour-copts -I/usr/mpkg/include -I/usr/local/include',
    optimize='-O2',
    cppflags='-fhonour-copts -I/usr/mpkg/include -pthread -fhonour-copts -I/usr/mpkg/include -I/usr/local/include'
    ccversion='', gccversion='3.4.6 (propolice; gpc; MirOS 0AAB)', gccosandvers='mirbsd10'
    intsize=4, longsize=4, ptrsize=4, doublesize=8, byteorder=1234
    d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=12
    ivtype='long', ivsize=4, nvtype='double', nvsize=8, Off_t='off_t', lseeksize=8
    alignbytes=4, prototype=define
  Linker and Libraries:
    ld='mgcc', ldflags ='-pthread -Wl,-E  -L/usr/mpkg/lib -L/usr/local/lib'
    libpth=/usr/mpkg/lib /usr/local/lib /usr/lib
    libs=-lm -lutil -lc
    perllibs=-lm -lutil -lc
    libc=/usr/lib/libc.so.41.9, so=so, useshrplib=false, libperl=libperl.a
    gnulibc_version=''
  Dynamic Linking:
    dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags=' '
    cccdlflags='-DPIC -fPIC ', lddlflags='-shared -fPIC  -L/usr/mpkg/lib -L/usr/local/lib'


Characteristics of this binary (from libperl): 
  Compile-time options: MULTIPLICITY PERL_DONT_CREATE_GVSV
                        PERL_IMPLICIT_CONTEXT PERL_MALLOC_WRAP USE_ITHREADS
                        USE_LARGE_FILES USE_PERLIO USE_PERL_ATOF
                        USE_REENTRANT_API
  Built under mirbsd
  Compiled at Mar 30 2011 17:29:16
  %ENV:
    PERL5LIB="/home/sts/cpansmoke/perl-5.12.3/cpan/build/DBI-1.616-ydK4Lp/blib/arch:/home/sts/cpansmoke/perl-5.12.3/cpan/build/DBI-1.616-ydK4Lp/blib/lib"
    PERL5OPT=""
    PERL5_CPANPLUS_IS_RUNNING="14167"
    PERL5_CPAN_IS_RUNNING="14167"
    PERL5_CPAN_IS_RUNNING_IN_RECURSION="29,14167"
    PERL_CR_SMOKER_CURRENT="DBIx-Tree-NestedSet-0.16"
    PERL_EXTUTILS_AUTOINSTALL="--defaultdeps"
    PERL_MM_USE_DEFAULT="1"
  @INC:
    /home/sts/cpansmoke/perl-5.12.3/cpan/build/DBI-1.616-ydK4Lp/blib/arch
    /home/sts/cpansmoke/perl-5.12.3/cpan/build/DBI-1.616-ydK4Lp/blib/lib
    /home/sts/cpansmoke/perl-5.12.3/lib/site_perl/5.12.3/MirBSD.i386-mirbsd-thread-multi
    /home/sts/cpansmoke/perl-5.12.3/lib/site_perl/5.12.3
    /home/sts/cpansmoke/perl-5.12.3/lib/5.12.3/MirBSD.i386-mirbsd-thread-multi
    /home/sts/cpansmoke/perl-5.12.3/lib/5.12.3
    .